Perancangan Rangkaian Cutter Pada Mesin Tenun Sunglee Bagian Unit Iii Dengan Metode Design For Manufacturing (Dfm) Di Pt. A

Authors

  • Noneng Nurhayani Universitas Islam Nusantara

Abstract

PT. A is one of the companies engaged in the fabric. Produce various type of fabric into one way to be able to compete with other textile companies. Some fabric products experience problem, especially on the feed always on the edge of the fabric, the result of feed adds the amount of quality of grade C grade, the last 4 monhts of feed on the edge of the cloth reaches 35%, the cutter that should function now is not repaired because the spare part is not found. Improved redesign of the cutter in sunglee weaving machine needs to be done to improve the  C grade that continues to risew due to woven feed on the edge of fabric. The design process of cutter with DFM method is problem solution for unit III, DFM method make design more take into account the easiness of making the design, the selection of the right materials, the design price does not require high cost, the design can be a solution for the problem. The designs were made using an energy change system, which used a scissor knife to cut the remainder of the feed shift, then was replaced with a heat system using a brass material, but not due to the exorbitant design price. The design changes were made by using heat-shifted niklin wire using the principle of energy change from electric energy converted to heat energy.

Author Biography

Noneng Nurhayani, Universitas Islam Nusantara

Jurusan Teknik Industri Fakultas Teknik Universitas Islam Nusantara

References

Sugiyono. 2014. Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung: Alfa Beta.

Stephen P, ranzevich. 2014. practical gear design and manufactur. Rineka Cipta

Arif, M. 2016. Rancangan Teknik Industri. Deepublish, Yogyakarta.

Matured, Andri. 2013. Metode Penelitian Teknik Industri. Graha Ilmu

Rangga, Agus. 2015. desain for manufacturing system. http//www.Tin305.weblog.esaunggul.ac.id

Ramdhani, Agil. 2016. metoda penerapan dfma terhaddap perancangan. http//www.Eprints.ulm.ac.id/836/TI-14

Rashid, Eka. 2015. Perancangan Alat Potong Polivin Pada Pt.Senjaya Sentosa.. http//www.e-journal.uajy.ac.id/2122/1/0TI05009

Irawan, Didi. 2016. Mechanical engineering research. Jurnal teknik mesin Mer-c. (Vol.1): 1-7

Pawadi. 2017. Perancangan Sistem Pendukung Keputusan Untuk Pemilihan Supplier Bahan Baku Dalam Rangka Mengintegrasikan Sistem Persediaan Dan Produksi Studi Kasus Di Pt. Sucaco Tbk. Jurnal Teknik Industri TRISAKTI (Vol.7): 62-75

Dedy, 2017. Lean Supply Chain Untuk Meningkatkan Efisiensi Sistem Manufaktur Pada Pt. Xyz. Junal Teknik Industri TRISAKTI (Vol.7): 119-131

G.O. Young, “Synthetic structure,” in Plastics, 2nd ed., vol. 3, J. Peters, Ed. New York: McGraw-Hill, 1964, pp. 15–64.

B. H . Amstead, Phillip F. Ostwald, Myron L. Begeman, , “Mechanical Technologys”, vol. 7, pp. 34–39, Jan. 1993.

Martin George H, “Kinematics and Dynamics of Machines,” ., vol. 4, New York: McGraw-Hillpp. A635–A646, Feb 2004.

Kwari, H.W. Ir, Kwari, Andy M.Sc., “AUTOCAD 2000 2D ,” Elex Media Komputindo 2001., to be published.

Sutalaksana Iftikar Z, Anggawisastra Ruhana, Tjakraatmaja Jann H, “ Teknik Perancangan Sistem Kerja,” ITB, 2006, pp. 45–489

Okumura, Toshie Prof Dr, Wiryosumarto, harsono, Prof Dr Ir , “Teknologi Pengelasan Logam,” pradya paramita, Jakarta, Indonesia, 2000

Kwari, H.W. Ir, Kwari, Andy M.Sc., “Mechanical Desktop 4.0” Elex Media Komputindo 2004., to be published

Apple James M,, “Plant Layout and Material Handling,” John Wiley & Sons , Inc, 1977

Downloads

Published

2018-12-13